281 Carbon Block Spa Pre-Filter
60729 LS 7000 (60729) Duraflexx, Syntexx RED, 26 Jets, 5hp Pump, 1500 Equip. 50 sqft. filter. LED.
LS 8000 (BURBOA) LS 8000 (BURBOA) Duraflexx, Ultra-Life RED, 23 Jets, 5hp pump, GFCI, 50 sqft. filter, OZONE READY, GFCI but no TITANIUM HEATER (2006 BURBOA MODEL)
for Balanced Water:
pH 7.2 - 7.8
Alkalinity 80 - 120 ppm
150 - 400 ppm
Sanitizer 3 - 5 ppm
Be sure to check your spa water regularly.
Ensure sanitizer levels are within the proper range of 3-5 ppm prior to each use.
If you use your spa more than three times per week your testing and water care should be performed more frequently.
Your filter cycles should be run at a minimum of 6 to 8 hours per day.
To ensure optimum water quality and to keep the water easy to balance be sure to drain your spa at least every three months or more often if the spa is used more frequently.
If you have a bromine generator your water should be drained between 8 and 12 months depending on usage. Be sure to always keep your pH balanced and your calcium hardness within proper range to avoid costly corrosive damage.