Renew

Renew
Renew is a non-chlorine shock treatment. This fast-dissolving granular rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.

When Renew is added to the spa water, it reacts with the bromide and forms a bromine solution to destroy any microorganisms left behind by the bather. Part of the Reserve & Renew® Chlorine-Free Sanitizing System.

Features:

Quickly dissolves in water to rid spa water of oils and residue.
Eliminates organic materials that cause odors, skin and eye irritation.
Use spa minutes after application.
pH buffered so it does not effect pH level.
Buffer potassium monopersulfate compound
Formulated with DuPont™ Oxone®

Applications:
After Each Use:
1. Turn on filtration system.
2. For each 250 gallons of water, add 2 ounces directly into spa water.
3. Run filtration system for 15 minutes with cover off.
4. Repeat process once a week to help maintain clear, odor-free water.

Tips:
The time to add Renew is after using the spa. Simply add the required dose, put the cover in place, and the water will be fresh, clean and ready for the next bather.

Compatible With:
Chlorine, bromine, ozone and mineral purifications systems, as well as part of the Reserve & Renew® System.

Advantage:
By adding Renew after spa use, the bather is not exposed to any sanitizer while in the water.

Browse Similar Items
ALL PRODUCTS

Best Sellers
LifeSpas Spa Covers
UNICEL Filter 6 x 8-1/4

Proper Levels
for Balanced Water:

pH 7.2 - 7.8
Alkalinity 80 - 120 ppm

Calcium Hardness

150 - 400 ppm
Sanitizer 3 - 5 ppm

Be sure to check your spa water regularly.

Ensure sanitizer levels are within the proper range of 3-5 ppm prior to each use.

If you use your spa more than three times per week your testing and water care should be performed more frequently.

Your filter cycles should be run at a minimum of 6 to 8 hours per day.

To ensure optimum water quality and to keep the water easy to balance be sure to drain your spa at least every three months or more often if the spa is used more frequently.

If you have a bromine generator your water should be drained between 8 and 12 months depending on usage. Be sure to always keep your pH balanced and your calcium hardness within proper range to avoid costly corrosive damage.